Industrial Kerosene Supplier in Malaysia
- Also known as
- Kerosene Oil
- Kerosine
Industrial kerosene supplier for manufacturers, maintenance teams and process buyers in Malaysia. Also called kerosene oil or kerosine, this mid-cut petroleum distillate is used as a solvent, degreaser, diluent and process-heating fuel where a kerosene specification is required.
Commercial options include industrial grade, solvent grade, low-odour material and process fuel cuts. Selection usually turns on distillation range, flash point, colour and odour rather than a single fixed assay, so buyers should state the controls that matter for their process.
Typical applications cover metal cleaning and degreasing, industrial cleaning blends, coatings diluents, rust-preventive mixes and burner or process-heating duty. This page does not cover white oil, white spirit, diesel or aviation fuel.
Send the required grade, specification, quantity and delivery location with your enquiry. Availability, packing, documentation and delivery timing are confirmed with the quotation.
- CAS number
- 8008-20-6
- Grade
- industrial, solvent, low-odour
- Appearance
- clear to pale yellow liquid
Kerosene grades and forms
We supply several forms to suit different formulating and dosing setups. If you need a size that is not listed, ask us.
| Grade | Form | Assay | Typical use | Packing |
|---|---|---|---|---|
| Industrial grade kerosene | clear to pale yellow liquid | — | General industrial solvent, cleaning and process work where a mid-cut petroleum distillate is specified rather than a highly refined white oil. | Confirm the required pack format with the quotation. |
| Solvent grade kerosene | clear liquid | — | Metal degreasing, diluent and formulation solvent in maintenance products, coatings auxiliaries and industrial cleaning blends. | Confirm the required pack format with the quotation. |
| Low-odour kerosene | clear liquid with reduced odour | — | Cleaning, maintenance and process duties where a lower odour profile is preferred over conventional industrial kerosene. Confirm the odour and aromatic requirement with the enquiry. | Confirm the required pack format with the quotation. |
| Process fuel grade kerosene | clear to pale yellow liquid | — | Burner and process-heating fuel where the equipment specification calls for kerosene rather than diesel or other middle distillates. | Confirm the required pack format with the quotation. |
How to buy kerosene from ChemTrade
Request a quote for kerosene
Use the form below to request a quotation. You can also email sales@chemtrademalaysia.com or send us a message on WhatsApp.
Specifications
| Parameter | Value | Method |
|---|---|---|
| Appearance | clear to pale yellow liquid | — |
| Chemical class | complex petroleum hydrocarbon distillate (mid-cut kerosene range) | — |
| Solubility | insoluble in water; miscible with many organic solvents | — |
| Grade controls | distillation range, flash point, colour, odour and aromatic content confirmed against the required grade | — |
Kerosene applications
Safety and handling
- Classification
- flammable
Store sealed in a cool, well-ventilated area away from ignition sources, heat and strong oxidisers. Keep containers closed, control vapour and follow the safety data sheet for the quoted grade. Supply is subject to applicable requirements.
Common questions about kerosene
Are kerosene, kerosene oil and kerosine the same product?
Yes. Kerosene, kerosene oil and kerosine are common names for the same mid-cut petroleum distillate family. State the grade and any flash-point, distillation or odour requirement in the enquiry, because industrial, solvent, low-odour and fuel cuts are not automatically interchangeable.
Is kerosene the same as white oil, white spirit or diesel?
No. White oil is a highly refined liquid paraffin for personal-care and technical oil uses. White spirit is a lighter aliphatic solvent cut. Diesel is a different middle distillate with its own fuel specification. This page covers industrial kerosene only; send the product named on your specification.
Which kerosene grade should I request?
Industrial and solvent grades are commonly chosen for degreasing, diluent and cleaning work. Low-odour grades suit applications where odour is a concern. Process fuel grade is selected when the equipment is rated for kerosene burner or heating duty. Include the application and any flash-point or distillation limits so the offer can be matched more closely.
What specifications should a buyer provide for kerosene?
State the intended use and any required limits for distillation range, flash point, colour, odour, aromatic content and water. For an existing process, attach the current specification or a representative sample requirement so the grade can be aligned before quotation.
Can bulk and packed kerosene be quoted?
Yes. List the preferred pack format or bulk delivery arrangement, quantity and delivery location in the enquiry. Available packing and commercial details are confirmed with the quotation for the requested grade.
What details are needed for a kerosene price enquiry?
Provide the grade, application, target specification, quantity and delivery location. Mention any preferred packing, documentation needs and timing so the quotation can address the full requirement.