Chemicals for Oil & Gas in Malaysia
ChemTrade supplies chemicals for oil & gas in Malaysia. Each listing carries typical specifications, packing and availability.
| Product | Used for |
|---|---|
| 1-Butene | Considered in refinery and petrochemical value chains where a defined C4 olefin feed is required. |
| 1-Hexene | Considered in petrochemical process chains and selected lubricant-intermediate manufacture. |
| 1,2,4-Trimethylbenzene | Aromatic component for petroleum and process-chemical applications that call for a defined trimethylbenzene identity or C9 solvent profile. |
| 2-Ethylhexanoic Acid | Building block for synthetic lubricant esters and related coolant or corrosion-inhibitor chemistry used in mechanical and process fluids. |
| 2-Ethylhexanol | Solvent and intermediate in oilfield additive and process chemical blends, including defoamer and demulsifier formulations. |
| 2-Ethylhexylamine | Raw material for selected corrosion-inhibitor, additive and process-chemical systems that require a branched C8 primary amine. |
| 2-Mercaptoethanol | Ingredient in selected petroleum-production processing and corrosion-control formulations where 2-mercaptoethanol is explicitly specified by the formulator. |
| 3-Dimethylaminopropylamine | Intermediate in selected corrosion-inhibitor and specialty process-chemical formulations for oil, gas and industrial systems. |
| Acrolein | Microbial-control treatment in selected oilfield water and injection systems where an acrolein programme is specified by the operator. State the process conditions and required product specification with the enquiry. |
| Acrylamide | Intermediate for water-soluble polymers used in selected drilling, recovery and produced-water treatment formulations. |
| Acrylic Acid Maleic Acid Copolymer | Polymer component in oilfield water-treatment formulations where the formulator specifies scale-control requirements. |
| Activated Bleaching Earth | Purification and decolourising of mineral oils, base oils, paraffin wax and petroleum jelly, where an adsorbent clay lifts colour and polar impurities. |
| Aminoethylethanolamine | Intermediate for lubricant, fuel-additive and corrosion-inhibitor chemistry developed to the formulator's specification. |
| Ammonium Persulfate | Gel breaker in fracturing and well-service fluids, reducing the viscosity of guar and other polymer gels after placement. |
| Ammonium Thiocyanate | Oilfield and process-fluid chemistry, including corrosion-inhibitor blends and acidising packages that name a thiocyanate component. |
| Ammonium Thioglycolate | Qualified oilfield and process-chemical formulations where reducing, chelating or corrosion-control requirements are buyer-defined. |
| Aromatic Solvent | Base for oilfield chemical packages, paraffin and asphaltene dispersants, and diluent duty in asphalt and pipeline coating systems. |
| ATMP | Formulation component for oilfield scale-control programmes developed to the operator's water chemistry. |
| Attapulgite | Salt-tolerant viscosifier and suspension aid in drilling fluids, used in saltwater, brine and high-electrolyte muds to carry cuttings and control fluid loss. |
| Barium Carbonate | Selected oilfield and mineral-processing formulations where barium carbonate is specified as a process chemical; grade and packing confirmed on enquiry. |
| Barium Sulphate | Drilling-grade barite used as a weighting agent in drilling fluids to raise mud density and help control wellbore pressure; not interchangeable with bentonite, which mainly provides rheology and sealing. |
| Base Oil | Hydraulic and turbine oil formulation for process plant, plus carrier and base fluid duty in selected oilfield and pipeline chemical blends. |
| Bentonite | Drilling fluid for oil, gas and water wells: builds viscosity so the mud carries cuttings, and seals the borehole wall. |
| Butane | Refinery and gas-processing feed, LPG blending component and hydrocarbon process stream where the specification identifies normal butane and its impurity profile. |
| Butylethanolamine | Used in selected process chemical and additive development where amine functionality is specified. |
| Calcium Acetate | Oilfield fluid and gel fuel formulation, where calcium acetate is used as a thickening or gelling component with the appropriate solvent system. |
| Calcium Bromide | Density control in clear completion and workover brines, including fluid systems that require a calcium bromide solution or compatible blended-brine programme without suspended weighting solids. |
| Carbohydrazide | Considered in water-treatment and process chemical programmes where oxygen control and plant qualification are required. |
| Carbon Dioxide | Used in selected oil, gas and petrochemical process duties where a defined Carbon dioxide purity, phase and delivery specification are required. |
| Carbon Monoxide | Process-analyser and combustion-instrument calibration using single or multi-component mixtures matched to the measurement range and gas matrix. |
| Carboxymethyl Cellulose | Filtration control and fluid loss reduction in water based drilling mud. |
| Cesium Formate | Cesium formate brine is a high-density, solids-free completion and workover fluid used where the well programme specifies a dense clear brine. Concentration and density are matched to the required fluid system. |
| Choline Chloride | Ingredient in selected oilfield and clay-control formulations where choline chloride is named by the formulator's specification. |
| Coal Tar Oil | Blending stream for industrial fuel oil, where the buyer sets the viscosity, water and sulphur limits the burner will accept. |
| Compressor Oil | Air and process-gas compressors whose lubricant specification accounts for compressor construction, gas compatibility, discharge conditions and the correct mineral or synthetic base fluid. |
| Corn Flour | Plant-derived process additive in selected drilling or support formulations where a defined corn-flour grade and particle size are specified. |
| Corrosion Inhibitor | Oil-compatible or water-dispersible inhibitor concentrates for suitable production, pipeline, refinery and hydrocarbon-fluid systems where the corrosion mechanism and application point are defined. |
| Cresylic Acid | Intermediate or additive feedstock in selected oilfield chemical and specialty formulations that call for a phenolic aromatic cut. |
| Cyclohexylamine | Condensate and steam system corrosion control on refinery, petrochemical and process plant utilities where a volatile amine is dosed with or in place of other neutralisers. |
| DBNPA | Biocide component for oilfield water-injection and associated industrial water-treatment programmes. |
| Di-Tert-Butyl Peroxide | Industrial fuel formulation use as a diesel ignition accelerator or cetane improver where di-tert-butyl peroxide is specified. |
| Dibasic Ester | Component in oilfield solvent packages, where a slow-evaporating ester helps dissolve organic deposits in downhole and surface equipment. |
| Dibutylethanolamine | Raw material for selected lubricant, fuel and process-additive formulations where oil solubility and amine functionality are required. |
| Diethanolamine | Acid-gas scrubbing amine for removing carbon dioxide and hydrogen sulphide from synthesis gas and other process gas streams. |
| Diethylamine | Intermediate for corrosion inhibitors, petroleum additives and related oilfield or refining chemistry that specifies diethylamine. |
| Diethylene Glycol | Gas dehydration and drying duty, and antifreeze or coolant formulation for industrial systems specified around diethylene glycol. |
| Diethylenetriamine | Used as an intermediate in selected fuel and lubricant additive formulations. |
| Diethylethanolamine | Intermediate or neutralising component in selected production, gas-treatment and corrosion-control formulations. |
| Diglycolamine | Amine component for natural-gas and refinery-gas sweetening and gas-dehydration systems that specifically use diglycolamine. |
| Diisopropanolamine | Absorbent or formulation intermediate in selected acid-gas treatment and process-chemical systems using diisopropanolamine chemistry. |
| Dimethyl Disulfide | Sulphur-bearing process material for catalyst sulphiding and related refinery operations whose approved procedure specifies DMDS. Process design, dosing and handling remain the responsibility of the operating site. |
| DTPMPA | Scale-control formulation component for oilfield and process-water systems, with suitability evaluated against the brine chemistry and target deposits. |
| EO-PO Block Copolymer | Used in selected oilfield chemical formulations where an EO-PO block copolymer is specified. |
| Ethylenediamine | Intermediate for lubricant dispersants, fuel additives and oilfield corrosion inhibitors that rely on amine functionality for surface adsorption. |
| Ethylethanolamine | Specialty amine intermediate for selected gas-treatment, corrosion-inhibitor and process-additive routes. |
| Fatty Alcohol Ethoxylate | Used in selected oilfield chemical formulations, subject to grade and formulation compatibility. |
| Ferric Chloride | Hydrogen sulphide scavenging and related produced-water or process-stream treatment where ferric chloride is the named reagent. |
| Ferrocene | Fuel or combustion-additive development where the buyer qualifies dispersion, dosage and performance in the intended system. |
| Fluoroelastomer | Polymer input for specialised sealing compounds used around fuels, oils and process fluids, selected against the actual service and test specification. |
| Furfural | Extractive solvent in the refining of lubricating oils, where furfural selectively removes aromatics to improve the base oil. |
| Gasoline | Used in refinery, terminal and wholesale fuel programmes that procure finished motor gasoline against a defined commercial fuel specification. |
| Gear Oil | Winches, pumps, drilling-support equipment and plant gear drives that require an industrial or automotive gear lubricant of a stated chemistry and viscosity. |
| Gilsonite | Ground natural asphalt additive for drilling fluids, fluid-loss control, lost-circulation treatment and oil-well cementing programmes that specify gilsonite particle and softening properties. |
| Glutaraldehyde | Oilfield and process biocide use in systems that call for glutaraldehyde solution at a stated concentration and dose regime. |
| Glyoxal | Crosslinker chemistry in fracturing and workover fluids, and a component in process treatment packages formulated around a dialdehyde. |
| Greases | Bearings, valves, actuators and other suitable mechanical equipment where the service environment, load and fluid exposure are matched to the chosen grease formulation. |
| Ground Granulated Blast-Furnace Slag | Component of slag-based hydraulic cementing blends used in oil and gas well cementing systems where the slurry design specifies ground granulated blast-furnace slag. |
| Guar Gum | Viscosifier and friction-reduction aid in water-based drilling fluids, with hydration rate and viscosity method stated in the enquiry. |
| HEDP | Scale-control additive in selected produced-water, process-water and heat transfer systems where phosphonate inhibition is specified. |
| Helium | Helium can be specified as a tracer or leak-test gas for process equipment, piping and containment systems, with the test method and purity set by the operator's established procedure. |
| Hexahydrotriazine | Considered for compatible water-based industrial process fluids where a triazine preservative is specified. |
| Highly Reactive Polyisobutene | Reactive polymer intermediate for lubricant and fuel-additive synthesis where molecular weight, terminal functionality and reaction behaviour are specified. |
| Hydrazine | Reducing agent, oxygen-control component and process intermediate in selected oil, gas and utility treatment programmes that specify hydrazine chemistry. |
| Hydrazine Hydrate | Process and utility water deoxygenation in oil, gas and related energy facilities where a hydrazine-based oxygen scavenger is specified. |
| Hydrogen | Refinery and petrochemical processing that consumes hydrogen as a reactant or reducing gas, with grade, pressure, flow and supply mode defined by the plant. |
| Hydrogen Sulfide | Process gas and sulfurising reagent in selected refinery, petrochemical and catalyst-treatment operations whose procedures specify H2S purity, flow and receiving conditions. |
| Hydrogenated Nitrile Rubber | Sealing elements, packers and blowout-preventer components for oilfield service where resistance to hydrocarbons and elevated temperature is required. |
| Hydrolysed Polymaleic Anhydride | Polymeric scale-control component in selected oilfield and produced-water formulations developed around the operating brine and target scale species. |
| Hydroxyethyl Cellulose | Specialised HEC grades are used to build viscosity and control fluid loss in selected water-based drilling, completion, workover or stimulation fluids. Send the fluid specification rather than substituting a general coating grade. |
| Ilmenite | Milled ilmenite is used in selected drilling-fluid and well-cement systems as a high-density weighting mineral. Particle distribution, suspension behaviour and compatibility must be evaluated in the complete fluid or cement design. |
| Isobutane | Branched C4 feedstock for refinery and petrochemical conversion, blending and process duties that distinguish isobutane from normal butane. |
| Isobutanol | Solvent and co-solvent in oilfield process and treatment chemicals, and in formulations blended for field use. |
| Isooctane | Petroleum and fuel testing where isooctane is used as a defined reference or process hydrocarbon against a named laboratory method. |
| Isoparaffin Solvent | Solvent and carrier use in selected drilling and metalworking fluid formulations. |
| Isopentane | Refinery and petrochemical feed, blending or process stream where the buyer defines isomer composition, purity and the receiving system. |
| Isopropylamine | Input to selected petroleum-production process aids and formulated chemical intermediates where isopropylamine is named in the manufacturing recipe. |
| Kerosene | Process heating and burner fuel where plant equipment is rated for kerosene, subject to the grade and flash-point requirement stated by the buyer. |
| Lauramine Oxide | Foaming and wetting component in oilfield and process fluid formulation, where amine oxide surfactants are used for foam generation and stability under load. |
| Magnesium Petroleum Sulfonate | Industrial oils, process lubricants and corrosion-control formulations. |
| Maleic Anhydride | Starting point for succinimide dispersants and other lubricant and fuel additive chemistry built by reacting the anhydride ring onto a polymer backbone. |
| Methane | Pure methane and defined methane mixtures for analyser calibration, detector testing, process-control checks and gas-handling development against a written method or instrument range. |
| Methanol | Process fluid and blending input in selected fuel, antifreeze and energy applications where the methanol grade matches the duty. |
| Methoxypropylamine | Considered for gas-treating formulations that use an aliphatic amine with both water compatibility and organic functionality. |
| Methyl Diethanolamine | Gas-sweetening and acid-gas removal amine for natural gas, refinery and synthesis-gas streams, chosen for selective hydrogen sulphide absorption and lower regeneration energy relative to primary and secondary ethanolamines. |
| Methyl Ester Sulphonate | Surfactant component for oilfield formulations where methyl ester sulphonate is specified. |
| Methyl Hydroxyethyl Cellulose | Viscosifier and fluid-loss aid in drilling and workover fluids. |
| Methyl Isobutyl Carbinol | Solvent or process component in selected petroleum, lubricant and maintenance formulations that explicitly call for MIBC and define purity and distillation criteria. |
| Methyl Oleate | Carrier, ester base fluid and lubricity component in selected oilfield and pipeline chemical blends. |
| Methyl Tert-Butyl Ether | Refinery and fuel-blending operations specify MTBE as a gasoline oxygenate and octane component against purity, water and hydrocarbon-profile requirements. |
| Methylisothiazolinone | Selected water-based process and service-fluid formulations that specify methylisothiazolinone for microbial control, subject to the buyer's exact active and application requirements. |
| Mica | Coarse mica flakes are used in selected drilling-fluid lost-circulation blends, with flake size and blend design established by the operator's fluid programme. |
| Modified Starch | Fluid-loss control and viscosity building in water-based drilling and workover fluids, where a treated starch tolerates conditions that would degrade an untreated one. |
| Molybdenum Dithiocarbamate | Industrial and process lubricants where friction, wear and additive compatibility are qualified. |
| Monoethanolamine | Acid-gas scrubbing solvent for removing carbon dioxide and hydrogen sulphide from natural gas, refinery gas and related process streams in amine treating units. |
| Monoisopropanolamine | Considered in gas-treating applications that call for monoisopropanolamine rather than another ethanolamine or isopropanolamine homologue. |
| Morpholine | Component of corrosion-inhibitor and amine-based treatment packages used on process and utility systems. |
| N-Formylmorpholine | Used as a selective polar solvent in aromatic-hydrocarbon extraction and related refinery or petrochemical separation processes. |
| N-Methyl-2-Pyrrolidone | Extraction and process solvent in selected petrochemical and gas-processing operations that call for NMP or N-methylpyrrolidone. |
| Naphtha | Refinery stream, blending component and petrochemical feedstock where the buyer specifies light or heavy naphtha by composition and distillation profile. Commercial matching requires the full stream specification. |
| Natural Gas | Feedstock for hydrogen, synthesis gas, ammonia and other downstream chemical production where sulphur, water, higher hydrocarbons and inert gases must be controlled for the process. |
| Neopentyl Glycol Dioleate | Specialty industrial lubricant and process-fluid programmes where the ester identity, viscosity behaviour and compatibility are set by the buyer. |
| Nital Etchant | Used in materials and inspection laboratories evaluating prepared steel specimens for engineering work. |
| Nitrile-Butadiene Rubber | Compound base for selected seals, packers, hose components and other oil-contact elastomer parts where the service-fluid and temperature limits are matched to the chosen NBR grade. |
| Nitrogen | Nitrogen for process purging, blanketing, pressure testing and commissioning tasks where the site procedure defines the gas quality and supply form. |
| Nonylphenol | Used as an intermediate for selected oilfield chemical formulations. |
| Normal Paraffin | Used in selected drilling and completion-fluid formulations according to the required carbon range and fluid specification. |
| Octylated Diphenylamine | Industrial oils, hydraulic fluids and lubricant packages requiring an oil-soluble antioxidant. |
| Organoclay | Used as a viscosifier and suspension aid in oil-based and synthetic-based drilling or completion fluid formulations. |
| Paraformaldehyde | Oilfield biocide and hydrogen sulphide scavenging formulations that specify paraformaldehyde as the solid active or precursor. |
| PBTC | Used in oilfield scale-control formulations where PBTC is specified for the target mineral and operating conditions. |
| Pentaerythritol Tetraoleate | Ester base fluid and lubricity component in selected industrial and oilfield lubricant and hydraulic blends. |
| Perfluoroelastomer | Sealing components for process and downhole equipment exposed to aggressive hydrocarbons and elevated temperatures. |
| Perlite | Loose-fill cryogenic insulation for storage vessels, cold boxes and low temperature pipework in gas processing and industrial gas service. |
| Phenolphthalein | Petrochemical and oil laboratory acid-base titration and process QC work where phenolphthalein is the specified indicator. |
| Phosphinocarboxylic Acid | Used in oilfield scale-control formulations, including programmes targeting barium or calcium sulphate deposits. |
| Phosphorous Acid | Intermediate in selected lubricant, process-additive and scale-control chemistries where the formulation specifies phosphorous acid or a derived phosphorus compound. |
| Piperazine | Component in specified aqueous amine gas-treatment formulations where the buyer defines piperazine concentration and the complete solvent composition. |
| Polyacrylamide Flocculant | Friction reducer and viscosity modifier in drilling fluids, and mobility control in enhanced oil recovery. |
| Polyalphaolefin | Compressor, refrigeration and process-equipment lubricants that call for a synthetic hydrocarbon PAO base fluid rather than a mineral Group I to III stock. |
| Polybutene | Lubricant and process-oil viscosity modifier in selected oilfield and industrial lubricant blends where a liquid butene polymer grade is specified. |
| Polycarboxylate Ether | Cement dispersant component in selected oil-well cement and grouting systems where the process specification identifies a compatible PCE chemistry and performance profile. |
| Polyisobutylene Succinic Anhydride | Intermediate for lubricant, fuel and oilfield additive chemistry where reactive PIBSA functionality is part of the formulation route. |
| Polyisobutylene Succinimide | Fuel and industrial-oil additive chemistry where dispersancy, deposit control and compatibility with the base oil are required. |
| Polylactic Acid | Degradable polymer component in selected temporary downhole articles and process materials that are engineered around a specified PLA grade, geometry and service profile. |
| Polypropylene Glycol | Intermediate for surfactant and demulsifier manufacture where a propylene oxide polyol backbone is required in the finished additive package. |
| Potassium Acetate | Completion, workover and drilling brines built on acetate rather than halide salts, chosen where formation compatibility or a low-chloride fluid is specified. |
| Potassium Bromide | Used as a soluble bromide salt in clear completion and workover brines where the fluid programme specifies Potassium bromide and a target solution composition. |
| Potassium Chloride | Potassium chloride brine for drilling and completion fluid, where the potassium ion holds reactive shale together and the brine carries density without damaging the formation. |
| Potassium Formate | Formate brine for drilling and completion-fluid systems where potassium formate is specified. |
| Potassium Persulfate | Gel breaker in fracturing and well-service fluids, cutting the viscosity of guar and other polymer gels after placement. |
| Potato Starch | Fluid-loss additive and viscosity contributor in selected drilling or completion fluid packages that call for potato starch. |
| Propane | Hydrocarbon feedstock and process material for petrochemical conversion, blending and energy duties that name propane as the required component. |
| Propargyl Alcohol | Acid corrosion inhibitor component for pickling and acidising systems where an acetylenic alcohol is specified for metal protection. |
| Propylene Carbonate | Physical solvent medium for selected gas treating and carbon dioxide absorption processes that call for a cyclic carbonate solvent. |
| Psyllium Husk | Lower-purity grades may be considered for industrial thickening and selected drilling-fluid applications where swell and viscosity performance matter. |
| Quaternium-18 | Quaternary treatment raw material for organophilic clay and bentonite used in drilling-fluid systems. |
| Raffinate-2 | C4 process stream for refining and petrochemical operations where raffinate-2 is taken up as a feedstock or blending component with a defined composition. |
| Rhamnolipids | Rhamnolipid biosurfactants are used in microbial enhanced oil recovery and bioremediation of hydrocarbon-contaminated soil and groundwater, improving the mobility and bioavailability of hydrophobic pollutants. |
| Sebacic Acid | Acid half of the dibasic ester base fluids used in synthetic lubricants, compressor oils and high-temperature greases, chosen for thermal stability and a low pour point. |
| Silica Flour | Mineral component in oilfield cementing and fracturing applications selected against the required technical specification. |
| Silica Fume | Additive in specified oil-well cement systems that require an ultrafine silica component for slurry stability, strength development or elevated temperature cement performance. |
| Silica Gel | Process drying of gases and instrument air where a regenerable solid desiccant bed is used to remove water vapour. |
| Silica Sand | Oil-field cement and selected proppant or completion mineral duties where a sized silica sand grade is specified. Grade and size band are confirmed against the well or slurry requirement. |
| Sodium Aluminate | Boiler and process water conditioning on industrial sites, including silica control and scale management in steam-raising systems. |
| Sodium Bromate | Used in selected completion and fracturing-fluid formulations as a gel-breaker component. |
| Sodium Bromide | Clear-brine fluid component for completion, workover and related well operations where sodium bromide density and concentration support well control and formation protection requirements. |
| Sodium C10-13 Alkylbenzenesulfonate | Surfactant for enhanced oil recovery and oilfield applications where a C10-13 alkylbenzene sulfonate is specified. |
| Sodium Chloride | Industrial brine preparation and related process salt use where sodium chloride is specified for density or electrolyte duty. |
| Sodium Chlorite | Chlorine dioxide generation for oilfield and industrial process water, including biocide duty on injection, cooling and process streams that name a chlorite feed. |
| Sodium Cumene Sulphonate | Used in selected oilfield chemical formulations as a hydrotrope and solubilising component. |
| Sodium Formate | Formate brine and drilling or completion fluid formulation, where sodium formate provides density without solids and suits low-solids and high-temperature systems. |
| Sodium Humate | Component in selected drilling and fluid-treatment formulations where a technical sodium humate grade is required by the formulator. |
| Sodium Naphthalene Sulphonate | Dispersant component in oil-well cement formulations where SNF chemistry is required. |
| Sodium Persulfate | Gel breaker in fracturing and well-service fluids, cutting guar and polymer gel viscosity in a controlled way after placement. |
| Sodium Petroleum Sulfonate | Considered in selected oilfield and process-fluid formulations as a surfactant, emulsifier or corrosion-control component. |
| Sorbitan Sesquioleate | Emulsifier and wetting component in compatible drilling, completion and process-fluid formulations. |
| Span 80 | Oil-soluble emulsifier and formulation component in selected drilling, production or process fluids that call for a low-HLB sorbitan monooleate. |
| Succinic Anhydride | Intermediate for selected lubricant and fuel-additive chemistry where succinic anhydride derivatives are built into dispersant or performance packages. |
| Sulfur Trioxide | Processing aid in petroleum refining and petrochemical operations where sulfur trioxide is specified. |
| Sulfurized Isobutylene | Functional additive in selected drilling, thread, gear and industrial lubricants used under severe load, subject to formulation compatibility. |
| Sulphuric Acid | Refining and chemical processing duties where sulphuric acid is specified as an acid catalyst or process reagent. |
| Tall Oil | Corrosion inhibitor and processing aid in drilling, extraction and refining operations where tall oil chemistry is specified. |
| Tall Oil Fatty Acid | Tall-oil-derived fatty-acid feedstock for selected oilfield chemical formulations. |
| Tallow Amine | Corrosion inhibitor and processing aid in drilling, extraction and support operations where fatty amine chemistry is specified. |
| Tallow Amine Ethoxylate | Used as an emulsifier or component of corrosion-inhibitor and process-chemical formulations. |
| Tallow Diamine | Used as a component in corrosion-inhibitor formulations for oilfield, pipeline and related process systems. |
| Tetraethylene Glycol | Functional glycol component in selected process-fluid, lubricant and gas or hydrocarbon service formulations where the exact glycol is specified. |
| THPS | Specified in oilfield water-treatment, souring-control, reducing-agent and iron-sulphide dissolver programmes. |
| Titanium | Process equipment, heat-transfer components and selected offshore service parts where the material specification calls for titanium corrosion resistance. |
| Tolyltriazole | Corrosion control for copper alloys in antifreeze, glycol-based heat transfer fluids and related circulating systems. |
| Transformer Oil | Process plant and terminal electrical infrastructure, including transformers and switchgear serving pumping, compression and loading facilities. |
| Triethylene Glycol | Drying natural gas. The gas is contacted with lean glycol in an absorber, water transfers into the glycol, and the rich glycol is boiled in a regenerator and returned to the column. |
| Triethylenetetramine | Intermediate in selected fuel, lubricant, pipeline and production-chemical additive systems where an ethyleneamine composition is specified. |
| Trimethylolpropane Trioleate | Specialty industrial lubricant and process-fluid programmes that set their own viscosity, composition and operating requirements. |
| Tungsten Oxide | Catalyst and catalyst-precursor material for selected refining and petrochemical processes. |
| Vinyl Ester Resin | Piping, tanks and process equipment in chemical process and hydrocarbon service, including flue-gas and scrubber duty at elevated temperature. |
| Viscosity Index Improver | Used in selected industrial lubricant and functional-fluid blends, with chemistry, form and treat requirements set by the blender's specification. |
| Xanthan Gum | Viscosity and solids suspension in water-based drilling fluids, with the performance grade and test method stated in the enquiry. |
| ZDDP | Used by industrial lubricant blenders preparing oils and multifunctional additive packages for specified equipment duties. |
| Zeolite | Drying and sweetening gas streams, and removing water and carbon dioxide ahead of air separation and refrigerant charging. |
| Zinc Anode | Sacrificial cathodic-protection systems for offshore equipment, pipelines, storage assets and other steelwork where the project specification calls for a zinc anode of a defined alloy, shape and attachment design. |
| Zinc Bromide | Zinc bromide solution is used in clear, high-density completion and workover brine systems. Buyers should state the required fluid density, concentration, blend components and compatibility criteria from the established well-fluid programme. |
| Zinc Ingot | Source metal for sacrificial zinc anodes protecting marine structures, offshore installations, pipelines and submerged steelwork. |
| Zinc Oxide | Component in selected lubricant and grease formulations where zinc oxide is listed in the additive package. |
| Zinc Phosphate | Marine and protective coating primers for offshore structures, storage tanks and process plant, specified as part of a multi-coat system rather than on its own. |
Request a quote
Tell us the product, grade and quantity you need and we will price it.