Chemicals for Pharmaceuticals & Healthcare in Malaysia
ChemTrade supplies 205 products into pharmaceuticals & healthcare in Malaysia. Each listing carries typical specifications, packing and availability.
| Product | Used for |
|---|---|
| 2-Hydroxyethyl Methacrylate | Monomer named in dental composite, cement and acrylic prosthetic formulations and in hydrogel and contact-lens polymer chemistry. What a given formulation may use is decided by its own specification and documentation. |
| Acetic Acid | Intermediate and process acid in selected pharmaceutical and antiseptic formulations, subject to the required grade and documentation. |
| Acetonitrile | Reaction and recrystallisation solvent in active ingredient and fine-chemical routes, and the mobile-phase solvent behind release and stability testing in quality control laboratories. |
| Acetylacetone | Building block in heterocyclic synthesis, where the 1,3-diketone reacts with amines, hydrazines and ureas to form pyrazoles, pyrimidines and related rings used in intermediate manufacture. |
| Activated Carbon | Process purification and decolourisation of intermediates and process streams where residual colour or organic impurities must be reduced. |
| Agar Agar | Gelling and suspending aid in suitable pharmaceutical gels and related formulations, subject to the selected grade and specification. |
| Allantoin | Ingredient in selected topical pharmaceutical and related formulations where pharmaceutical-grade material and matching documentation are specified. |
| Allulose | Sweetening component in selected lozenges, chewable products and related formulations where the buyer specifies a food or formulation grade of allulose. Supply is subject to applicable requirements. |
| Ammonium Nitrate | Instant cold packs, which work because dissolving the salt absorbs heat from its surroundings. A small volume beside the fertiliser and mining trades. |
| Antifoam | Foam control in fermentation, bioprocess vessels, liquid manufacture and filling where the selected grade matches the buyer's process specification. |
| Arabic Gum | Binder, suspending aid, emulsifier and film-forming excipient in tablets, syrups and other formulated products, subject to the selected grade and specification. |
| Ascorbic Acid | Active ingredient or excipient in vitamin C preparations, oral solids, sachets and liquid formulations, selected against the required pharmacopoeial or buyer specification. |
| Beeswax | Excipient and ointment base component in suitable pharmaceutical and topical formulations, subject to the selected grade and specification. |
| Benzalkonium Chloride | Antimicrobial raw material for antiseptic, sanitiser and wipe formulations where benzalkonium chloride is listed on the bill of materials. |
| Benzoic Acid | Pharmaceutical-grade free acid for selected formulations and compounding when the grade and specification match the product requirement. |
| Benzoyl Chloride | Intermediate for buyer-specified pharmaceutical and fine-chemical synthesis routes. |
| Benzyl Alcohol | Solvent and preservative in injectables, topical preparations and other formulated medicinal products, subject to the selected grade and specification. |
| Betaine | Formulation ingredient or methyl-donor component matched to the buyer's grade and documentation requirement; supply is subject to applicable requirements. |
| Brilliant Blue FCF | Colouring for pharmaceutical and nutraceutical coating formulations where Brilliant Blue FCF is specified. |
| Bromhexine Hydrochloride | Active raw material for oral liquid, tablet, capsule and sachet manufacture, bought against a named raw-material specification by generic and contract formulators. Supply is subject to applicable requirements. |
| Butyl Rubber | Vial stoppers, plungers and closure compounds use halobutyl grades for low moisture and gas transmission and for clean extractable behaviour. State the pharmacopoeial requirement with the enquiry. |
| Calcium Carbonate | Pharmaceutical-grade powder for selected formulation and excipient duties when the grade, purity and documentation set match the product requirement. |
| Calcium Lactate | Calcium source or mineral component in oral solids, sachets, syrups and other formulated products, selected against the required pharmacopoeial or buyer specification. |
| Calcium Stearate | Tablet lubricant, glidant and anticaking agent in solid dose manufacture where a pharmaceutical grade calcium stearate is specified. |
| Camphor | Pharmaceutical or compounding grade material for selected formulations where solid camphor is specified, subject to the grade and documentation required. Supply is subject to applicable requirements. |
| Carbomer | Thickener and suspending agent in topical gels, ointment bases, oral suspensions and mucoadhesive systems. Suitability rests on the grade specification and the finished dosage form, so describe the end use. |
| Carboxymethyl Cellulose | Tablet binder and viscosity modifier in suspensions and syrups. |
| Carnauba Wax | Tablet coating, polishing and film-forming aid in selected solid-dose formulations, subject to the grade and specification requested. |
| Carrageenan | Suspending and viscosity agent in oral liquid preparations, and a gelling component in capsule and topical systems, subject to the grade selected. |
| Castor Oil | Excipient and carrier in oral and topical preparations, and the raw material the ethoxylated solubilisers are made from. |
| Castor Oil Ethoxylate 45 | Formulation solubiliser or emulsifier when a buyer specification names PEG-45 castor oil or castor oil ethoxylate 45 EO for a liquid system. |
| Ceteareth-60 Myristyl Glycol | Nonionic co-emulsifier and consistency aid in topical bases, where an ethoxylated structuring ingredient is written into the formulation. |
| Cetearyl Alcohol | Fatty alcohol component in ointments, creams and topical bases where an excipient-grade cetearyl or cetostearyl alcohol is specified. Suitability depends on the selected grade and target monograph or internal standard. |
| Cetyl Alcohol | Fatty alcohol component in ointment bases and other pharmaceutical or excipient systems when the selected grade and documentation match the formulation requirement. Supply is subject to applicable requirements. |
| Cetylpyridinium Chloride | Quaternary raw material for topical and healthcare product formulations that name cetylpyridinium chloride in the specification. |
| Chlorhexidine Gluconate | Cationic bisbiguanide for clinical antiseptic solutions, surgical scrub bases and other pharmaceutical preparations where a suitable grade and concentration are specified. |
| Chlorocresol | Topical and pharmaceutical preservation where chlorocresol is specified and the required grade is suitable for the formulation. |
| Chloroform | Process solvent in pharmaceutical intermediate and active-ingredient manufacture where the chemistry calls for chloroform at a stated purity or stabiliser level. |
| Chloroxylenol | Antiseptic ingredient for topical antiseptic solutions, wound-cleaning preparations and related pharmaceutical formulations, subject to the selected grade and specification. |
| Citric Acid | Anhydrous grade for effervescent tablets and powders, pH adjustment and chelation where free moisture from monohydrate would shorten shelf life or start premature reaction with carbonates. |
| Citric Acid Monohydrate | Acidulant or pH-adjusting excipient in syrups, solutions and other formulations that accept monohydrate crystal water, subject to the selected grade and specification. |
| Corn Starch | Binder, diluent and dry-blend aid in tablets and powder formulations when a pharmaceutical or food-suitable grade and specification are selected. |
| Cream of Tartar | Pharmaceutical-grade monopotassium tartrate for excipient use and effervescent formulations where the salt, not free tartaric acid, is specified. Supply is subject to applicable requirements. |
| Crospovidone | Superdisintegrant in immediate-release tablets and hard capsules, used at low inclusion levels to break the compact apart quickly and release the active for dissolution. |
| Cyclohexanone | Reaction and recovery solvent, and a starting material for ring-substituted intermediates where the ketone carbonyl is the reactive site. |
| Denatured Alcohol | Solvent in selected medicinal solutions, tinctures and topical preparations where the chosen denatured grade and specification meet the formulation requirement. Supply is subject to applicable requirements. |
| Dicalcium Phosphate | Diluent and compressible filler or binder in tablets, capsules and other dry-dose forms, subject to the selected pharmaceutical or excipient grade. |
| Diethyl Ether | Reaction medium for moisture-sensitive synthesis steps and a washing or recrystallisation solvent in active ingredient routes, using dried material where the chemistry demands it. |
| Diethylamine | Building block and process intermediate in selected pharmaceutical and fine chemical synthesis routes that call for this secondary aliphatic amine. |
| Diethylene Glycol Monoethyl Ether | Solubilising and carrier solvent in liquid, topical and laboratory preparations where a water-miscible, high-boiling ether is written into the formulation, with the purity level set by the buyer's own standard. |
| Dimethyl Sulfoxide | Polar aprotic solvent and process medium in pharmaceutical synthesis and formulation where dimethyl sulfoxide is specified for the chemistry or product system. |
| Dimethylformamide | Solvent and process medium in pharmaceutical intermediate and active ingredient manufacture where the process chemistry calls for DMF. |
| Dipotassium Phosphate | Buffer component and potassium-phosphate nutrient salt in selected pharmaceutical and nutritional preparations against the required grade. |
| Distilled Water | Non-injectable process, cleaning and formulation work where distilled water is requested. This page does not cover sterile water or water for injection; name any monograph or purity standard in the enquiry. |
| Erythritol | Sweetening or bulk component in lozenges, chewable products and other formulations where the buyer specifies a food or formulation grade of erythritol. |
| Ethanol | Solvent, extraction medium and processing aid in pharmaceutical and nutraceutical manufacture, subject to the selected grade and specification. |
| Ethyl Acetate | Crystallisation, washing and recovery solvent in active-ingredient manufacture, with the water and acidity limits set by the process rather than by the general solvent specification. |
| Ethyl Lactate | Process and cleaning solvent in pharmaceutical manufacturing where the grade, specification and documentation are defined by the buyer. |
| Ethylenediamine | Synthesis intermediate where a short symmetrical diamine is required to form rings, salts or side chains in active ingredient and excipient manufacture. |
| Ethylhexyl Palmitate | Considered for topical formulations where an emollient ester or carrier for oil-soluble ingredients is specified. |
| Eucalyptus Oil | Fragrance or cooling component in selected topical and formulated products when a pharmaceutical-standard or buyer-specified eucalyptus oil grade is required. Supply is subject to applicable requirements. |
| Fructose | Sweetening and bulk component in selected syrups, oral liquids and related formulations where pharmaceutical-grade D-fructose is specified. Supply is subject to applicable requirements. |
| Fumed Silica | Glidant and powder flow aid in tabletting and dry blending, and adsorption of small liquid additions onto a free-flowing powder, when a grade and documentation set suitable for the use are specified. |
| Gamma Butyrolactone | Intermediate and process solvent in pharmaceutical synthesis where the buyer specifies gamma-butyrolactone rather than a related pyrrolidone. |
| Glucono Delta Lactone | Acidifying and chelating ingredient in selected pharmaceutical and nutraceutical preparations that name a mild lactone acid on the specification. Supply is subject to applicable requirements. |
| Glucose | Excipient and sweetener in solid and liquid medicines, and carbohydrate source in oral rehydration and related preparations, subject to grade. |
| Glycerine | Humectant, solvent and lubricant in syrups, capsules and topical preparations, to the USP, EP or BP monograph. |
| Glycerol Monostearate | Emollient, emulsifier and viscosity-increasing agent in topical creams, ointments and related formulations when the selected grade is suitable. |
| Glycine | Amino acid raw material for tablets, capsules, injectables, medical nutrition and other formulated products when a pharmaceutical or nutrition-grade specification is required. |
| Guar Gum | Binder, disintegrant and viscosity aid in tablets, suspensions and related dosage forms, subject to the selected grade and specification. |
| Gum Ghatti | Suitable grades are used as binders and suspension aids in pharmaceutical formulations, subject to the required specification. |
| Hexamine | Supplied as methenamine or urotropine for selected antiseptic and disinfectant pharmaceutical preparations, subject to the required grade and documentation. |
| HPMC | Tablet binder, film coating polymer, sustained release matrix and the shell of vegetarian capsules. |
| Hyaluronic Acid | Topical formulation ingredient when a suitable grade is specified for non-injectable products; supply is subject to applicable requirements. |
| Hydrazine Hydrate | Intermediate and reducing chemistry in pharmaceutical and fine-chemical manufacture where hydrazine hydrate is the named raw material, subject to the selected grade and specification. |
| Hydrogen Peroxide | Surface and equipment disinfection in manufacturing hygiene programmes where a peroxide solution is selected for the required strength and residue profile. |
| Hydroxylamine Sulphate | Intermediate use in pharmaceutical and agrochemical synthesis where hydroxylamine sulphate is specified. |
| Iodine | Starting material for antiseptics, iodophors, organic iodides and other iodine-containing pharmaceutical intermediates, subject to the selected grade and specification. |
| Ion Exchange Resin | Purified water generation ahead of distillation or membrane stages, with the required specification and documentation stated in the enquiry. |
| Isopropyl Acetate | Process solvent for reactions, washing and liquid extraction in active-ingredient and fine-chemical manufacture, run to the plant's own specification. |
| Isopropyl Myristate | Solubilising and penetration vehicle in topical ointments, creams and related bases when an excipient-grade or monograph-aligned isopropyl myristate is specified. Suitability depends on the selected grade and target standard. |
| Isopropyl Palmitate | Vehicle and co-solvent in topical ointments, gels and medicated creams when the formulation calls for an excipient-grade ester. Suitability follows the grade selected and the standard the formulation is written to. |
| Itaconic Acid | Intermediate for selected synthesis routes where a suitable purity and documented grade are specified. Supply is subject to applicable requirements. |
| L-Threonine | Amino acid ingredient for medical nutrition, dietary supplements and other formulated preparations where a defined L-threonine grade and specification are required. |
| Lactose | Diluent and carrier in tablets, capsules and dry-powder inhaler formulations, subject to the specified grade and documents. |
| Lanolin | Ointment and cream vehicle for topical and dermatological preparations, on its own or blended with soft paraffin bases, when a grade meeting the formulation's pharmacopoeial specification is required. |
| Magnesium Carbonate | Antacid active and tablet excipient where acid-neutralising capacity, bulk and powder handling of the selected pharmaceutical grade matter. |
| Magnesium Oxide | Raw material for antacid and magnesium supplement manufacture, and an alkaline excipient in solid dose formulation. |
| Magnesium Stearate | Lubricant and anti-adherent in tablet compression and capsule filling, used at low addition levels in solid dose blends and in nutraceutical and supplement manufacture. |
| Malic Acid | Acidulant or pH-adjusting excipient in selected medicinal and nutraceutical products, subject to the required grade and specification. |
| Maltitol | Sweetener, vehicle and bulking component in oral syrups, chewable tablets, lozenges and similar formulations made to the grade and standard the buyer names. Supply is subject to applicable requirements. |
| Maltodextrin | Excipient for tableting, capsule filling, granulation and solid-dose carriers when a suitable pharmaceutical or pharmacopoeial grade is specified. |
| Matpers FD 297 | Solubilising and emulsifying aid in selected medicinal solutions and other formulated systems when the buyer names Matpers FD 297 or an equivalent castor oil ethoxylate grade. |
| Menthol Crystal | Flavouring and counterirritant in cough syrups, lozenges, inhalant preparations and topical analgesic creams, subject to the selected grade and specification. |
| Mercury | Amalgam filling material in dental practice. |
| Methacrylic Acid | Monomer behind methacrylic acid copolymers used in dental and specialty resin systems. Suitability rests on the finished polymer specification, so describe the end use with the enquiry. |
| Methanesulfonic Acid | Intermediate and process acid in pharmaceutical and fine-chemical synthesis routes that specify methanesulfonic acid, subject to the selected grade and documentation. |
| Methoxypropylamine | Used as a synthesis intermediate where a specified methoxypropylamine grade is required. |
| Methyl Cellulose | Binder and film-forming polymer for tablets and coatings, and the viscosity component in bulk-forming and ophthalmic formulations. State the grade and documentation needed with the enquiry. |
| Methyl Diethanolamine | Intermediate in selected pharmaceutical and agrochemical synthesis routes, subject to the selected grade and finished-product requirements. |
| Methyl Methacrylate | Monomer for selected dental materials and orthopaedic bone-cement systems where a defined grade and documentation set are required. Suitability depends on the finished formulation specification. |
| Methyl Paraben | Preservative raw material for oral liquids, syrups, suspensions and topical preparations where a pharmacopoeial designation is stated in the bill of materials. |
| Methyl Salicylate | Raw-material ester for topical analgesic rubs, balms and related medicated formulations. This page covers the industrial ester for manufacturing, not a finished consumer rub. Suitability depends on the selected grade and target specification. Supply is subject to applicable requirements. |
| Methylcyclohexane | Process solvent in pharmaceutical and specialty organic synthesis where methylcyclohexane is named in the process or cleaning step. |
| Methylene Chloride | Extraction and reaction solvent in pharmaceutical intermediate and active ingredient manufacture where the process chemistry calls for dichloromethane. |
| Microcrystalline Cellulose | The standard tablet and capsule excipient, working as diluent, dry binder and disintegration aid in a single addition. Grade code decides whether the route is wet granulation, roller compaction or direct compression. |
| Modified Starch | Binder, diluent and disintegrant duty in solid-dose formulation, subject to the grade and documentation the buyer specifies for the application. |
| Mono Potassium Phosphate | Buffer component and mineral source in pharmaceutical and related formulations, subject to the selected grade and specification. |
| Monoammonium Phosphate | Buffer component and mineral source in pharmaceutical and related formulations, subject to the selected grade and specification. |
| Monocalcium Phosphate | Calcium phosphate source and excipient duty in dry-dose and oral formulations that specify the monobasic salt to a pharmacopoeial or equivalent grade. |
| Morpholine | Building block in pharmaceutical and fine-chemical synthesis where the morpholine ring is carried into the target molecule. |
| N-Butanol | Extraction and process solvent in pharmaceutical and fine chemical manufacture, against the grade and documentation named in the enquiry. |
| N-Butyl Bromide | Used as a butylating intermediate in pharmaceutical synthesis where the purchasing specification calls for n-butyl bromide or 1-bromobutane. |
| N-Heptane | Used as a reaction or crystallisation solvent in pharmaceutical and fine-chemical processing where the process specification calls for n-heptane. |
| N-Propanol | Process, granulation and cleaning solvent in pharmaceutical manufacturing, subject to the grade and documentation named in the enquiry. |
| Nitromethane | Intermediate and reaction solvent in synthesis routes that build on the nitro group, including nitroalcohol chemistry and fine-chemical steps that require a high-purity nitromethane feed. |
| Oleic Acid | Excipient and process intermediate in selected drug, soft-gel and vitamin preparations, subject to the selected grade and specification. |
| Olive Oil | Carrier and excipient oil in topical and oral preparations that call for an olive oil of a stated grade and specification. |
| P-Toluenesulphonic Acid | Intermediate and process acid in pharmaceutical and fine-chemical synthesis routes that name p-toluenesulphonic acid, subject to the selected grade and documentation. |
| Panthenol | Ingredient in selected topical and formulated products where a panthenol grade is specified. Suitability depends on the selected grade and documentation requirement; supply is subject to applicable requirements. |
| Paracetamol | Bulk API raw material for tablets, capsules, suspensions, suppositories, effervescent systems and related dosage forms under generic and contract manufacture. Supply is subject to applicable requirements. |
| Paraffin Wax | Ointment and suppository bases, and as a coating on tablets and capsules. |
| Paraformaldehyde | Intermediate and synthesis use in suitable pharmaceutical manufacturing routes, subject to the selected grade and specification. |
| Pectin | Specified grades for selected oral and topical formulations as a gelling or stabilising aid, subject to the buyer's required pharmacopoeial or quality specification. |
| PEG-40 Hydrogenated Castor Oil | Formulation solubiliser for hydrophobic ingredients in oral, topical and other liquid systems when the buyer specifies polyoxyl 40 hydrogenated castor oil or a customer-defined standard. |
| Peppermint Oil | Excipient and flavouring oil in oral, topical and other formulated products where a pharmaceutical or pharmacopoeia grade of peppermint oil is required. Supply is subject to applicable requirements. |
| Peracetic Acid | Surface, room and instrument disinfection duty in healthcare and laboratory settings where a peroxygen disinfectant is specified. |
| Petroleum Ether | Natural-product and active-ingredient extraction steps, and washing or precipitation stages that call for a defined petroleum ether fraction. |
| Petroleum Jelly | Ointment base and topical formulation ingredient where the required grade, purity profile and documentation are agreed before supply. |
| Phenol | Intermediate and synthesis feedstock in selected pharmaceutical and fine chemical routes, subject to the required grade and specification. |
| Phenolphthalein | QC laboratory titration and analytical reagent use where the selected grade and specification permit. Supply is subject to applicable requirements. |
| Phenoxyethanol | Solvent or preservative in selected topical preparations, vaccines and other formulated products, subject to the selected grade and specification. |
| Phosphorus Oxychloride | Standard chlorinating and dehydrating reagent in active ingredient and intermediate synthesis, including heterocyclic chlorination and formylation chemistry. |
| Phthalic Anhydride | Intermediate in selected synthesis routes; state the required purity and documentation with the enquiry. Supply is subject to applicable requirements. |
| Polydextrose | Bulking excipient, carrier and coating component in solid-dose work, where a soluble carbohydrate with little sweetness suits the formulation and the selected grade carries the documentation the buyer specifies. |
| Polyethylene Glycol | Ointment and suppository bases, tablet film coating, and as a solubiliser and excipient in liquid and solid dose formulation. |
| Polyphosphoric Acid | Intermediate and process aid in pharmaceutical and fine-chemical manufacture where a suitable purity grade is selected against the reaction and impurity profile. |
| Polysorbate 20 | Solubiliser and protein stabiliser in oral liquids, topical preparations and parenteral formulations against the NF or Ph. Eur. monograph. |
| Polysorbate 60 | Non-ionic emulsifier in topical creams, ointments and other formulations specified for Polysorbate 60, with the required standard stated by the buyer. |
| Polysorbate 80 | Solubilising and emulsifying excipient for oral liquids, topical preparations and other pharmaceutical formulations where the required grade and standard are specified. |
| Potassium Acetate | Potassium source and buffering salt in formulation work, including dialysis and irrigation concentrate preparation, where the required standard is stated on the enquiry. |
| Potassium Bicarbonate | Electrolyte replenisher and systemic alkaliser in suitable pharmaceutical and nutraceutical formulations, subject to the selected grade and specification. |
| Potassium Carbonate | pH regulator and alkaline process chemical in selected pharmaceutical manufacture, subject to the selected grade and specification. |
| Potassium Chloride | Manufacturing input for oral rehydration salts, infusion and dialysis concentrate, and as an excipient. |
| Potassium Citrate | Buffering and pH control in oral and other formulated products when the selected grade meets the required monograph or finished-product specification. Supply is subject to applicable requirements. |
| Potassium Cyanide | Process reagent for selected pharmaceutical-intermediate synthesis routes that specifically call for potassium cyanide. |
| Potassium Iodate | Raw material for pharmaceutical and nutraceutical formulations requiring a controlled purity iodate grade. Enquiries should describe the formulation use and specification rather than a finished dosage requirement. |
| Potassium Iodide | Raw-material potassium iodide for pharmaceutical and related iodine formulations, subject to the selected grade and specification. Enquiries should describe formulation use rather than finished tablet or dosage requirements. |
| Potassium Sodium Tartrate | Used in selected effervescent and laxative formulations where the formulation calls for potassium sodium tartrate. |
| Potassium Sorbate | Used as an excipient preservative in selected oral and topical formulations when required by the product specification. |
| Potato Starch | Excipient, binder or disintegrant in tabletting and related solid-dose work when a suitable pharmaceutical or food-contact grade is requested. Supply is subject to applicable requirements. |
| Povidone Iodine | Bulk raw material for formulated antiseptic solutions, surgical scrubs, ointments, gargles and related pharmaceutical or OTC iodine complexes. Finished medicinal products are not supplied from this page. |
| Propyl Paraben | Preservative component in selected oral-liquid and topical formulations requiring propyl paraben. |
| Propylene Glycol USP | Solvent, cosolvent and humectant in oral, topical and other medicinal preparations where propylene glycol USP is named on the specification. |
| Psyllium Husk | Bulk fibre ingredient for nutraceutical and pharmaceutical bulk-forming preparations, subject to the selected grade and specification. Supply is subject to applicable requirements. |
| Salicylic Acid | Intermediate and active-ingredient feedstock for pharmaceutical manufacture, including synthesis routes such as acetylsalicylic acid chemistry and topical preparations, subject to the selected grade and monograph. |
| Shea Butter | Fatty base or emollient component in topical creams, ointments and related formulated products when a suitable grade and specification are selected. |
| Silica Gel | Sachets and bulk desiccant for primary and secondary packaging where product stability depends on a controlled low-humidity environment. |
| Silver Chloride | Electrode material behind disposable ECG, EEG and biosensor sensing pads, where an Ag/AgCl layer provides the stable half-cell. Supply is subject to applicable requirements. |
| Silver Nitrate | Raw material for antimicrobial silver preparations and wound-care formulations when the selected grade and specification permit. Supply is subject to applicable requirements. |
| Sodium Alginate | Excipient and film-forming hydrocolloid in oral suspensions, tablet matrices, controlled-release systems and related formulations, subject to the selected pharmaceutical grade and specification. |
| Sodium Benzoate | Specified as a preservative or excipient in selected oral and topical formulations when required by the product specification. |
| Sodium Bicarbonate | Raw material for antacid and effervescent formulations and for dialysis-related manufacturing to an appropriate specification. |
| Sodium Borohydride | Selective reducing agent for pharmaceutical and fine-chemical synthesis, including common aldehyde and ketone reduction steps where NaBH4 is the specified reagent. |
| Sodium Bromide | High-purity grades for pharmaceutical and related formulations subject to the selected monograph, assay and documentation requirements. |
| Sodium Citrate | Buffering and pH control in oral and other formulated products; anticoagulant and calcium-binding duty in blood-collection and related preparations when the selected grade meets the required specification. |
| Sodium Cyanide | Cyanide reagent for nitrile intermediates in the synthesis of active ingredients. |
| Sodium Cyclamate | Sweetening agent in selected oral syrups, liquids and solid-dose products when the formulation calls for sodium cyclamate against the chosen grade and specification. |
| Sodium Erythorbate | Used to protect oxidation-sensitive ingredients in selected medicinal and related preparations when required by the product specification. |
| Sodium Hypochlorite | Surface and instrument disinfection in clinical and manufacturing hygiene programmes where a hypochlorite solution is selected for the required available chlorine level. |
| Sodium Lactate | Ingredient for pharmaceutical or electrolyte formulations matched to a stated grade or monograph. This page covers bulk sodium lactate, not finished infusion or clinical dosage products. |
| Sodium Lauryl Sulphate | Tablet disintegrant and wetting agent, and a suspending agent in oral syrups. |
| Sodium Methoxide | Used as a catalyst or intermediate in selected pharmaceutical and vitamin manufacturing routes where sodium methoxide is specified. |
| Sodium Monochloroacetate | Used as a synthesis intermediate where a specified pharmaceutical or fine-chemical route calls for sodium monochloroacetate. |
| Sodium Perborate | Higher-purity grades used in pharmaceutical and oral-hygiene formulation, where purity limits rather than bleaching strength set the specification. |
| Sodium Propionate | Preservative component in pharmaceutical and topical formulation work where a propionate salt rather than the free acid suits the base. |
| Sodium Saccharin | Taste-masking sweetener in oral syrups, suspensions, chewable and effervescent tablets, where sodium saccharin is chosen for solubility and stability in the finished formulation. |
| Sodium Stearoyl Lactylate | Emulsifying and processing aid in selected tablet and capsule formulations, subject to the chosen grade and the finished-product specification. |
| Sorbic Acid | Mild preservative or excipient in selected oral and topical preparations when required by the product specification and grade documentation. |
| Sorbitan Monostearate | Used as an emulsifier in selected topical formulation systems. |
| Sorbitol | Sweetener, vehicle and moisture stabiliser in syrups, oral liquids, soft capsules and selected solid-dose formulations, subject to the selected grade. |
| Soy Lecithin | Emulsifying and carrier function in selected pharmaceutical and nutraceutical preparations, subject to the required grade and specification. |
| Soy Protein | Protein ingredient for selected nutrition and formulated products when a suitable food or pharmaceutical-related grade and documentation are specified by the buyer. |
| Span 80 | Emulsifying and dispersing aid in topical and other pharmaceutical formulations when the selected grade and specification are suitable for the dosage form. |
| Stannous Chloride | Reducing agent in radiopharmaceutical preparation kits and comparable formulation work that specifies a tin(II) salt of stated purity. Supply is subject to applicable requirements. |
| Succinic Acid | Salt formation, intermediate synthesis and formulated pharmaceutical work subject to the selected pharmaceutical grade and specification. |
| Succinic Anhydride | Intermediate in pharmaceutical synthesis routes; grade, purity and documentation requirements should be stated with the enquiry. Supply is subject to applicable requirements. |
| Sucralose | Sweetening agent in selected syrups, chewable tablets and related oral formulations when the buyer specifies a food or formulation grade of sucralose against the required specification. |
| Talc | Tablet lubricant, glidant and selected excipient use when a pharmaceutical grade and documentation set are specified for the formulation. |
| Tartaric Acid | Acidulant or pH-adjusting excipient in selected medicinal and nutraceutical formulations, subject to the required grade, isomer and specification. |
| Tartrazine | Colourant in tablet coatings, capsule shells, syrups and oral liquids when the formulation names this colour index or E number. Supply is subject to applicable requirements. |
| Taurine | Pharmaceutical or nutrition grades support tablets, sachets, medical nutrition and other formulated products where a defined taurine specification and supporting documents are required. |
| Tetrahydrofuran | Reaction medium for pharmaceutical and fine-chemical synthesis, including Grignard and hydride chemistry, subject to the selected purity and stabiliser package. |
| Tetrahydrofurfuryl Alcohol | Used as an intermediate and reaction solvent in pharmaceutical and fine-chemical synthesis. |
| Trehalose | Excipient, bulking agent and stabiliser in lyophilised and liquid formulations, including protein and biologics work, where a higher-purity grade is specified. Supply is subject to applicable requirements. |
| Triacetin | Excipient, film-coating plasticiser and solvent in pharmaceutical manufacturing where a pharmacopoeial specification is requested. |
| Tricalcium Phosphate | Diluent, flow aid and calcium salt in tablets, capsules and supplement blends, with the granular agglomerate used where direct compression and dust control matter. |
| Triethylamine | Acid scavenger and base catalyst in active ingredient and intermediate synthesis, taking up hydrogen chloride released during acylation, sulphonylation and similar steps. |
| Trimethylolpropane Triacrylate | Dental and specialty composite formulations that specify TMPTA as the acrylate monomer. |
| Vitamin E | Nutritional and formulation use where free tocopherol or alpha-tocopherol is specified as the vitamin E ingredient, subject to the selected grade and buyer specification. |
| Vitamin E Acetate | Softgel, tablet, ointment and topical formulation work that specifies alpha-tocopheryl acetate against a monograph or an in-house specification. |
| White Oil | Excipient, carrier and topical formulation ingredient where the required grade, purity profile and documentation are agreed before supply. |
| Xanthan Gum | Specified excipient grades for oral suspensions, tablet binding and controlled-release matrices, subject to the buyer's required specification. |
| Xylitol | Excipient or sweetening component in lozenges, chewable tablets and other formulations made to the buyer's required specification. |
| Zinc Dust | Process reducing agent in intermediate synthesis where the manufacturing specification calls specifically for zinc dust of a defined grade. |
Request a quote
Tell us the product, grade and quantity you need and we will price it.