Chemicals for Automotive in Malaysia
ChemTrade supplies chemicals for automotive in Malaysia. Each listing carries typical specifications, packing and availability.
| Product | Used for |
|---|---|
| 1,3-Butadiene | Supports polymer and elastomer value chains serving tyres, components and other automotive materials. |
| 2-Ethoxyethyl Acetate | Retarder solvent in selected refinish coating systems where controlled evaporation is required. |
| 2-Ethylhexanoic Acid | Building block for synthetic lubricant esters and for coolant corrosion inhibitor chemistry used in engine and driveline fluids. |
| 2-Ethylhexanol | Feedstock for lubricant and hydraulic fluid additive esters, and for coating resin intermediates used in refinish and industrial finishing. |
| 2-Hydroxyethyl Acrylate | Monomer for two-component acrylic polyol resins used in refinish and industrial topcoats, where the hydroxyl value of the resin sets how it crosslinks with the isocyanate hardener. |
| 6PPD | Tyre, hose, belt, seal and vibration-control compounds requiring protection against surface cracking and ageing. |
| ABS Resin | Used in selected interior, trim and functional components requiring a balance of processability and impact performance. |
| Acetylene | Workshop and repair operations requiring portable flame cutting, heating or brazing with the matching oxygen and regulator equipment. |
| Acrylic Resin | Thermoplastic and thermosetting binders for automotive refinishing and component coatings, selected around the coating system, curing schedule, hardness and exterior-durability requirement. |
| Acrylonitrile | Upstream monomer behind ABS mouldings, instrument-panel components and oil-resistant nitrile elastomer parts used across vehicle assembly. |
| Activated Bleaching Earth | Re-refining and reclamation of used lubricating and insulating oils, where the clay removes degradation products and colour ahead of finishing. |
| Aliphatic Polyisocyanate | Hardener component for automotive OEM and refinish clearcoats where an aliphatic polyurethane system is specified. |
| Alkyd Resin | Binder in selected primers, enamels and component-finishing systems that specify an Alkyd resin grade, compatible crosslinker or drier package and defined cure schedule. |
| Aminoethylethanolamine | Intermediate for selected adhesion-promoter and additive formulations. |
| Ammonium Fluoride | Metal treatment and finishing operations may specify ammonium fluoride in formulated surface-preparation systems for compatible components, with the concentration and process controls set by the formulation owner. |
| Anhydrous Ammonia | Nitrogen-bearing atmosphere for selected heat-treatment and nitriding operations used on engineered metal components. |
| Antimony | Antimony-bearing lead alloys for selected battery grids and components where the producer's approved material specification defines the antimony content and impurity limits. |
| Argon | Welding and fabrication atmosphere for stainless steel, aluminium and specialist vehicle components when the qualified welding procedure calls for argon. |
| ASA Resin | Used in selected exterior trim, housings and components requiring colour and weathering performance. |
| Asbestos | Controlled comparison and identification of fibres in legacy brake, clutch, gasket and friction-material samples, not a claim of suitability for new component manufacture. |
| Barium Sulphate | Functional filler and extender in vehicle primers, sealers and sound deadening compounds, and in friction material formulations. |
| Base Oil | Engine oil, transmission fluid, gear oil and workshop lubricant blending, where viscosity grade and API base-oil group drive the formulation. |
| Benzotriazole | Yellow-metal inhibitor in engine coolant and antifreeze packages, where benzotriazole protects copper, brass and bronze in the cooling circuit alongside the other additives in the formulation. |
| Boron | Transportation and component-material manufacturers may specify elemental boron through specialised alloys, ceramics and performance materials, with the grade chosen against the upstream production route. |
| Boron Carbide | Considered in wear-resistant processing and component manufacture requiring controlled abrasive or ceramic powder. |
| Butane | Hydrocarbon component for suitable fuel, aerosol-service and refrigeration manufacturing applications where the equipment specification names n-butane. |
| Butyl Diglycol | Base and diluent component in brake fluid and hydraulic fluid blending, where a high-boiling glycol ether with controlled water content is worked into the formulation. |
| Butyl Glycol Acetate | Retarder component in refinish thinners and spray blends worked in warm, humid conditions where a fast thinner would dry before the coat flows together. |
| Butyl Rubber | Tyre innerliners and inner tubes, curing bladders and vibration mounts rely on butyl rubber for air retention and damping. Chlorobutyl and bromobutyl grades are normally specified where co-vulcanisation with the carcass matters. |
| Butyl Stearate | Ester component in metal forming lubricants, body panel drawing compounds and polish or wax products used in vehicle assembly and refinishing. |
| Cadmium | Cadmium anode forms for established component-plating processes where the bath design, anode geometry and deposit specification have already been set by the operator. |
| Calcium Sulfonate | Detergent additive use in lubricating oil and engine oil formulations selected by base number. |
| Caprolactam | Feedstock for the polyamide 6 components, tyre cord fabric and under-bonnet mouldings that automotive suppliers produce from nylon 6 resin and fibre. |
| Carbon Black | Reinforcing filler and black pigment in tyres, hoses, belts and moulded rubber components, where abrasion resistance and UV stability matter to service life. |
| Carbon Monoxide | Carbon monoxide calibration mixtures for exhaust-gas and combustion analysers, specified by concentration, balance gas and any co-components. |
| Carnauba Wax | Hardness and gloss component in automotive, furniture and related polish formulations, typically blended with other waxes and solvents. |
| CBS Rubber Accelerator | Tyre and automotive rubber parts that need the scorch safety and cure speed of a sulfenamide accelerator in production. |
| Cellulose Acetate Propionate | Resin component in automotive refinish and selected original-equipment coating formulations. |
| Cerium Oxide | Catalyst support and oxygen-storage component in automotive exhaust systems, and selected diesel or fuel-additive formulations that call for cerium oxide. |
| Chlorinated Paraffin | Extreme-pressure additive in metalworking fluids for component machining, and a plasticiser and flame retardant in vehicle cable and trim compounds. |
| Chlorinated Polyolefin | Used for coatings and adhesion-promoter systems on polypropylene, TPO and related automotive plastic parts. |
| Chromic Acid | Decorative chrome on trim and fittings, and hard chrome build-up on shafts, rods, cylinders and hydraulic components where wear resistance and surface finish are specified together. |
| Chromium | Specialty-alloy and component-material production where elemental chromium is specified as an alloying input for controlled metallurgical processing. |
| Chromium Nitrate | Trivalent chromium passivation of zinc and zinc-alloy plated fasteners, brackets and pressed components, where the finish is specified without a hexavalent chromium step. |
| Cobalt | Cobalt-bearing alloys serve selected high-temperature, wear and magnetic components in automotive and transport manufacturing, with material chemistry controlled by the component producer's specification. |
| Coconut Shell Powder | Reinforcing or friction-modifying particulate in selected brake, clutch and composite component formulations where the existing recipe specifies coconut shell powder. |
| Conformal Coating | Considered for electronic modules and control assemblies exposed to environmental or temperature conditions. |
| Coolants | Engine, commercial-vehicle and equipment cooling circuits that specify an approved coolant chemistry, concentrate or premix and service interval. |
| Copper Cyanide | Used in controlled copper strike and base-plating processes for selected automotive fittings and components where adhesion to the substrate and compatibility with later plating steps are important. |
| Corrosion Inhibitor | Corrosion inhibitor component in suitable coolants, metalworking fluids, cleaners and temporary-protection treatments used in parts manufacture and maintenance. |
| Decyl Oleate | Lubricity component in selected lubricant and metalworking formulations where a fatty ester of defined composition is required. |
| Denatonium Benzoate | Antifreeze, coolant and screenwash formulations that carry a bitterant to deter accidental ingestion. |
| Diacetone Alcohol | Component in selected hydraulic and brake fluid formulations and in refinish thinner blends worked in warm, humid conditions where fast solvents cause blushing. |
| Dibutylethanolamine | Component considered in metalworking fluids and corrosion-inhibitor packages for machining and fabricated metal operations. |
| Die Attach Film | Electronic package assembly for automotive modules when the chosen film meets the relevant thermal and reliability programme. |
| Diethyl Sebacate | Ester component for specialty lubricant and process-fluid formulations where viscosity and low-temperature response are important. |
| Diethylene Glycol | Glycol component in antifreeze and coolant formulations specified around diethylene glycol rather than MEG. |
| Diethylene Glycol Monomethyl Ether | Solvent component for selected brake-fluid and hydraulic-fluid formulations where DEGME is specified. |
| Diisobutyl Ketone | Refinish and industrial vehicle-coating blends, particularly spray work in warm, humid conditions where a slow ketone controls flow, gloss and film build on the last stage of evaporation. |
| Diisodecyl Phthalate | Used in flexible vinyl compounds for interior and under-bonnet components selected for service at elevated temperatures. |
| Diisononyl Cyclohexane-1,2-Dicarboxylate | Flexible polymer components and interior compounds whose approved formulation specifies DINCH rather than a phthalate or terephthalate plasticiser. |
| Diisononyl Phthalate | Wiring harness insulation, sealing and weatherstrip profiles and vinyl interior trim, where compounds sit at raised cabin and engine bay temperatures. |
| Dilauryl Thiodipropionate | Formulation ingredient in specialty lubricant and polymer systems used for automotive components and service fluids. |
| Dioctyl Phthalate | Plasticiser in flexible PVC for wiring harness insulation, sealing profiles, artificial leather trim and underbody coating systems. |
| Dioctyl Sebacate | Base-fluid or additive component in specialised automotive lubricants and functional fluids that explicitly identify the DOS ester. |
| Dioctyl Terephthalate | Non-phthalate plasticiser in flexible PVC for interior trim, wiring insulation and sealing components where DOTP is specified. |
| Diphenylguanidine | Tyre, hose, belt, seal and technical-rubber compounds where cure rate, scorch behaviour and final physical properties are qualification-controlled. |
| Dipropylene Glycol Methyl Ether | Used in brake fluid and hydraulic fluid formulations. |
| Electrically Conductive Adhesive | Qualified electronic module, sensor and conductive-bond applications subject to the relevant reliability and thermal-cycling programme. |
| EPDM Rubber | Polymer input for automotive sealing, hose, gasket and weather-exposed rubber compounds where EPDM is specified. Finished-component performance depends on the complete compound and processing system. |
| Epoxidised Soya Bean Oil | Component of wire harness insulation, interior trim sheet and other flexible PVC parts where a bio-based secondary plasticiser is specified alongside the primary plasticiser. |
| Epoxy Resin | Coatings, adhesives and composite components in automotive and related transport manufacturing, subject to the selected grade and cure package. |
| Erucic Acid | Considered in lubricant, grease and specialty ester programmes requiring a long-chain monounsaturated fatty-acid feedstock. |
| Ethyl 3-Ethoxypropionate | Refinish and OEM topcoat blends, where a high-boiling solvent controls flow and gloss development through the drying window and reduces solvent popping in thicker films. |
| Ethylene | Upstream input for polymer, elastomer and coating materials used in vehicle components where the resin producer specifies an ethylene-based chemistry. |
| Ethylene Acrylic Rubber | Base polymer for turbocharger and oil-cooler hoses, shaft seals, dampers and other under-bonnet parts that must withstand heat and automotive fluids. |
| Ethylene Thiourea | Cure accelerator in polychloroprene compounds for hoses, belts, seals and vibration-control parts. |
| Ethylene Vinyl Acetate Copolymer | Sound-damping, sealing, interior and flexible foam components produced from compounded EVA grades selected for the target hardness and durability. |
| Fluoroelastomer | Raw elastomer for automotive sealing and fluid-handling compounds where the component manufacturer controls formulation and finished-part qualification. |
| Furfuryl Alcohol | Furan sand binders produce the cores and moulds behind engine, transmission and chassis castings, where binder reactivity governs strip time and casting finish. |
| Gasoline | Used as petrol fuel for compatible spark-ignition cars, commercial vehicles and fleet equipment against the required regular or premium grade. |
| Gear Oil | Manual transmissions, axles, differentials and final drives that specify an SAE gear-oil viscosity and a documented performance class. Automotive oils should not be selected only from an industrial ISO viscosity number. |
| Glycerol Dioleate | Lubricity and friction-modifying component for compatible metalworking and industrial fluid formulations rather than a finished lubricant. |
| Graphene | Research and development of conductive and lightweight composite components where the chosen graphene grade is evaluated in the actual polymer, coating or electrode formulation. |
| Graphite | Friction materials for brake pads, clutch facings and related compounds that use graphite powder as a solid lubricant and thermal conductor. |
| Greases | Chassis points, wheel-bearing systems, universal joints and other suitable automotive or commercial-vehicle components when the equipment specification names the required grease type and consistency. |
| Hafnium | Upstream raw material for selected high-temperature alloy systems used in transport and aerospace components, with the exact master-alloy route and metal form set by the producer. |
| Hexahydrotriazine | Used in the preservation and management of compatible water-based machining coolants and metalworking fluids. |
| Hexylene Glycol | Component of brake fluid and hydraulic fluid formulations, and of vehicle cleaning and maintenance chemistry where a water-miscible diol is named. |
| High-Density Polyethylene (HDPE) | Polymer for selected moulded automotive components and containers requiring a stated melt-flow, stiffness, impact and additive profile. |
| Highly Reactive Polyisobutene | Raw material for automotive lubricant, fuel and performance-additive chemistry, not a finished additive or ready-to-use fluid. |
| Hydraulic Oil | Workshop and industrial hydraulic equipment, forklifts and related material handling systems that specify anti-wear hydraulic oil by ISO viscosity grade. |
| Hydrogenated Nitrile Rubber | Base polymer for timing belts, fuel and oil seals, hose covers and under-bonnet components where heat and oil resistance exceed standard NBR service limits. |
| Iridium | Used as raw material in selected high-durability electrode and catalyst manufacturing applications; finished spark plugs and supported catalysts remain separate products. |
| Isodecyl Pelargonate | Considered as a lubricity or base-stock component in compatible automotive and metalworking lubricant formulations. |
| Isopropyl Alcohol | Cleaning and degreasing solvent for component surfaces, glass and electrical contacts ahead of bonding, coating or assembly. |
| Lanolin | Cavity, underbody and chassis protection compounds and long-term storage coatings for components, where a water-repellent wool wax film is applied over bare or coated metal. |
| Lanthanum | Raw material for selected hydrogen-storage and battery-alloy systems used in automotive and energy-storage manufacturing, with composition controlled by the finished alloy specification. |
| Lead | Metallic feedstock for lead-based battery grids, terminals and other components, with the final composition and any alloying elements defined by the battery or component producer. |
| Lithium Carbonate | Lithium source for lithium soap greases and related lubricating grease manufacture used in automotive and industrial lubrication. |
| Lithium Hydroxide | Lithium and lithium-complex greases used on vehicle and equipment bearings, chassis points and wheel hubs, where the grease maker specifies lithium hydroxide as the saponifying base. |
| Lithium Iron Phosphate | LFP cathode material for traction batteries where the chemistry is selected for thermal stability and long cycle life. |
| Lithium Nickel Manganese Cobalt Oxide | NMC cathode material for electric-mobility and automotive battery programmes where the cell design names the required composition. |
| Lithium Titanate | LTO anode material for traction batteries where rapid charging and long service life are specified. |
| MABS Resin | Interior, trim and functional components requiring a defined surface and impact balance. |
| Magnesium | Alloy feed for lightweight cast housings, brackets, structural components and drivetrain parts where a magnesium-based alloy is specified by the component producer. |
| Magnesium Petroleum Sulfonate | Engine-oil and drivetrain lubricant formulations requiring detergent or acid-neutralising additive performance. |
| Manganese | Upstream alloying raw material for selected manganese-bearing steels and aluminium alloys used in vehicle and component manufacture. The required alloy route determines whether manganese metal or a ferroalloy is suitable. |
| MBT Rubber Accelerator | Tyre, belt, hose and other automotive rubber components where an MBT-based cure package is part of the formulation. |
| MBTS Rubber Accelerator | Applied in tyre and technical-rubber formulations where cure behaviour, scorch safety and physical properties are controlled by the complete accelerator system. |
| MDI | Polyurethane elastomer, adhesive, footwear and moulded-component systems may specify monomeric or modified MDI grades for wear, flexibility or structural performance defined by the finished formulation. |
| Methanol | Feedstock and process material in fuel and screen-wash related manufacture, and a solvent in industrial cleaning of components. |
| Methyl Amyl Ketone | Refinish primers, basecoats and clears, and commercial vehicle finishes, where the slower flash-off widens the spray window in a warm workshop. |
| Methyl Methacrylate | Feedstock for acrylic coating resins and related polymer systems used in automotive refinish and industrial coating work. |
| Methyl Tert-Butyl Ether | Fuel formulators assess MTBE within complete gasoline specifications rather than treating the ether as a finished automotive fuel by itself. |
| Methylal | Oxygenated fuel or fuel-additive formulation work where methylal is assessed against the blend, compatibility and purity requirements of the programme. |
| MOCA | Curing-agent component in selected cast polyurethane bushes, wheels, rollers and wear parts where the elastomer formulation specifies MOCA. |
| Molybdenum | Alloy-manufacturing input for steels and high-performance metal systems used in automotive and transport components, ordered against the alloy producer's chemical and physical specification. |
| Molybdenum Dithiocarbamate | Engine oils, gear oils and drivetrain lubricant packages requiring a molybdenum friction modifier. |
| Monoethylene Glycol | Base glycol for engine coolant and antifreeze formulation, where the freeze point, boil point and inhibitor package are set by the finished product specification. |
| Mould Release Agent | Release coating for moulded composite, polyurethane, rubber and plastic components, with the grade matched to the tool surface, cure cycle and downstream finishing requirement. |
| Natural Gas | Compressed natural gas for compatible vehicle and fleet systems where fuel composition, pressure and connection requirements are defined by the user. |
| Natural Rubber | Tyre compounds, engine mounts, bushes, hoses and other automotive rubber components where resilience, strength and compound performance are defined by the finished formulation. |
| Neodymium | Input to magnet-alloy production for selected electric motors, actuators and sensor systems, with acceptance controlled by the approved alloy and trace-element requirements. |
| Neopentyl Glycol | Raw material for synthetic ester base fluids in engine, compressor and refrigeration lubricants, and for the coil and refinish resin systems used on vehicle and appliance panels. |
| Neopentyl Glycol Dioleate | Lubricant and metalworking fluid systems for automotive component production where the formulation names neopentyl glycol dioleate. |
| Nickel Chloride | Feed salt for electroless nickel and nickel strike chemistry used to coat automotive and engineering components where wear and corrosion resistance is specified. |
| Nickel Hydroxide | Battery-material production for nickel-based rechargeable systems used in vehicle and mobility applications, where the required grade is matched to the electrode process and qualification specification. |
| Nitrile-Butadiene Rubber | Elastomer for suitable fuel-system, lubrication-system and under-bonnet seals, hoses and gaskets where resistance to oils or fuels is part of the compound specification. |
| Nitrocellulose | Repair, touch-up and specialty lacquer formulations where nitrocellulose is selected for quick drying and polishable film behaviour. |
| Nonylphenol | Used in the manufacture of selected lubricant and fuel additive components. |
| Nylon 6 | Used in selected under-bonnet, interior and functional components after the required heat, impact, moisture and mechanical performance are defined. |
| Nylon 66 | Used in selected under-bonnet, structural and functional parts using the required reinforcement and heat-stabilisation package. |
| Octylated Diphenylamine | Engine, gear and drivetrain lubricant formulations. |
| Palladium | Precious-metal input for emission-control catalyst manufacture where the converter or catalyst producer defines metal purity, particle form and the supported formulation required downstream. |
| PC/ABS Blend | Technical mouldings, interior parts, instrument housings and selected under-bonnet or exterior components where the grade meets the service requirement. |
| PC/PBT Blend | Exterior, interior and under-bonnet components where the compound needs impact, dimensional stability and resistance to selected automotive fluids. |
| Pentaerythritol Tetraoleate | Ester base stock in synthetic engine, hydraulic and gear oils where oxidative stability and film strength are required. |
| Perfluoroelastomer | High-temperature sealing applications whose media, temperature and dimensional requirements specifically call for perfluoroelastomer. |
| Phenol Sulphonic Acid | Used in specified metal-finishing formulations where phenol sulphonic acid chemistry is required. |
| Phenolic Resin | Thermosetting binder for brake pads, clutch facings and related friction materials where cure profile, flow and thermal performance are specified. |
| Platinum | Catalyst manufacturers use platinum-bearing material in selected emissions control systems. The required metallic form, purity and catalyst-production specification should be stated rather than inferred from the end use. |
| Polyalphaolefin | Synthetic base stock for passenger-car and commercial engine oils, transmission fluids and related automotive lubricant packages matched to the selected PAO viscosity grade. |
| Polybutadiene Rubber | Tyre tread, sidewall and other rubber compounds that blend BR with natural rubber or synthetic elastomers to meet the tyre maker's resilience, wear, processing and service-temperature targets. |
| Polybutene | Viscosity modifier and tackifier in two-stroke oils, lubricant packages and related automotive fluid formulations matched to the selected viscosity grade. |
| Polybutylene Terephthalate | Sensor housings, connectors, lighting components and selected under-bonnet parts where the design specifies PBT resin, reinforcement level, colour and performance requirements. |
| Polychloroprene Rubber | Compounds for suitable hoses, boots, seals, vibration components and other parts where the chosen grade meets the service-fluid and temperature requirement. |
| Polyether Polyol | Polyether polyol grades selected for polyurethane seating foam and related automotive components. |
| Polyethylene Wax | Polish, wax and care formulations, and lubricant additive duty, where a fine solid wax contributes gloss, slip or a dry film. |
| Polyisobutylene | Lubricant and fuel additive manufacture, where liquid polyisobutylene grades act as the base for dispersant and detergent additive chemistry and as viscosity modifiers. |
| Polyisobutylene Succinic Anhydride | Raw material for ashless dispersant and performance-additive synthesis used in engine oil, gear oil and other automotive lubricant systems. |
| Polyisobutylene Succinimide | Ashless dispersant component for engine oils, gear oils, transmission fluids and other automotive lubricant systems. |
| Polymeric MDI | Moulded foam, structural foam and selected polyurethane adhesive or elastomer applications in vehicle and component manufacturing. |
| Polymethyl Methacrylate | Lamp lenses, illuminated trim, instrument covers and exterior or interior components made with optical, weatherable or impact-modified PMMA grades. |
| Polyolefin Elastomer | Soft-touch, impact-modified, sealing and flexible technical parts where a polyolefin elastomer is compatible with the base resin. |
| Polyoxymethylene | Precision gears, clips, latches, guides, fuel-system components and interior mechanisms where a low-friction engineering thermoplastic is specified by the component designer. |
| Polyphenylene Sulfide | Used in selected under-bonnet, fuel-system, coolant-system and electrification components after chemical, thermal and dimensional requirements are defined. |
| Polyphthalamide | Under-bonnet, powertrain-adjacent, connector, sensor and structural parts where a high-temperature polyamide compound is specified. |
| Polypropylene Glycol | Polyol feedstock for elastomer, sealant and selected fluid systems used in automotive and related industrial components. |
| Polypropylene Resin | Interior trim, battery cases, under-bonnet parts and compounded components, commonly using impact-modified or filled polypropylene grades. |
| Polyvinyl Butyral | PVB interlayer film for automotive laminated glazing selected against the required sheet, optical, adhesion and impact-performance specification. |
| Polyvinyl Chloride | Flexible compounds and plastisols for selected interior trim, cable, sealant and protective-coating applications requiring a defined PVC formulation. |
| Potassium Silver Cyanide | Silver deposit source for plated electrical contacts and connectors where conductive silver finishes are required. |
| Precipitated Silica | Reinforcing filler in tyre tread compounds, used where rolling resistance and wet grip are balanced against abrasion performance. |
| Propylene Glycol | Base glycol for selected coolant, antifreeze and heat-transfer fluid formulations. Buyers requiring a finished inhibited fluid should state the inhibitor package and dilution rather than ordering neat MPG alone. |
| Propylene Glycol Methyl Ether | Component in brake fluid, hydraulic fluid and de-icer blending, and in workshop cleaning chemistry where a water-tolerant solvent is preferred. |
| Propylene Glycol USP | Glycol base for antifreeze and heat-transfer formulations where a lower toxicity profile than ethylene glycol is required. |
| Propylene Oxide | Upstream intermediate for polyether-based foams, elastomers, fluids and formulated materials used in vehicle components and industrial maintenance. |
| Rayon | High-tenacity industrial rayon yarn for selected cord and reinforcement constructions where the approved material specification explicitly calls for rayon rather than polyester, polyamide or another fibre. |
| Rhodium | Rhodium metal input for emissions-control catalyst manufacturing processes where the producer specifies the metal form or identifies a separate rhodium compound precursor for its coating method. |
| SAN Resin | Selected interior, trim and functional components where the resin grade is qualified for the required processing and service conditions. |
| Sebacic Acid | Component in coolant and engine-fluid corrosion inhibitor chemistry and in the ester greases specified for wheel bearings and other high-temperature points. |
| Silicon Carbide | Friction materials and brake-pad formulations that use silicon carbide as a hard abrasive or reinforcing filler, subject to the selected grade and size cut. |
| Silicone Emulsion | Polish, tyre dressing, trim care and car-care formulation, where an emulsion lets a silicone be carried in a water-based product. |
| Silicone Oil | Release agent, lubricant and polish component in car-care products and in rubber and plastic component manufacture. |
| Silicone Rubber | Moulded seals, connector components, hoses, boots and vibration-control parts made from HCR or LSR grades selected for the relevant exposure and cure process. |
| Silver Anode | Used in silver-plating lines for selected electrical contacts, switches and engineered components that specify a silver deposit and compatible anode form. |
| Silver Grain | Elemental silver grain used in compatible component-plating lines that have an established bath, anode-basket arrangement and deposit specification. |
| Silver Sintering Paste | Qualified attachment of power devices in automotive inverters, charging systems and control modules where sintered silver is specified. |
| Sodium Petroleum Sulfonate | Used in selected lubricant, grease, protective-oil and maintenance-fluid formulations requiring emulsification or rust-inhibiting performance. |
| Solder Flux | Qualified electronics and electrical assembly processes for suitable sensors, controls, lighting and power modules. |
| Solder Paste | Electronics assembly for suitable automotive control, lighting, sensing and power modules where the solder paste is matched to the approved process. |
| Stearic Acid | Activator used with zinc oxide in sulphur-cured rubber for tyres and technical components, and a release and lubricant raw material in component moulding. |
| Styrene-Butadiene Rubber | Emulsion and solution SBR grades for tyre tread, sidewall and selected technical rubber compounds where the formulation specifies solid SBR. |
| Styrene-Ethylene-Butylene-Styrene Block Copolymer | Suitable grades for interior soft components, seals, grips and flexible compounds where weathering, colour and ageing requirements guide selection. |
| Sulfurized Isobutylene | Additive component in suitable gear oils, greases and drivetrain lubricant packages where the formulation specifies sulphurised isobutylene. |
| Sulphur Powder | Vulcanising agent in tyre and industrial rubber compounding, selected by particle size to suit the cure system. |
| Talc | Reinforcing and stiffening filler in polypropylene compounds for bumpers, interior trim and under-bonnet mouldings. |
| Tall Oil Fatty Acid | Formulation component for selected metalworking fluids, corrosion inhibitors and lubricant additives. |
| Tantalum | Alloy addition and specialty metal input for high-performance transport components where a tantalum-bearing material is specified by the alloy or component producer. |
| TBBS Rubber Accelerator | Cure-system component in tyre and suitable automotive rubber compounds where TBBS is named in the approved formulation. |
| TCPP | Considered in selected polyurethane foam and interior-component formulations where flame-retardant performance, colour and compatibility are specified by the compound developer. |
| TDI | Flexible and moulded polyurethane foam systems for seating, headrests and selected interior components where the foam producer specifies the TDI grade and polyol package. |
| Tellurium Diethyldithiocarbamate | Vulcanisation accelerator for rubber components used in automotive applications. |
| Tetraethylenepentamine | Used as an intermediate in the manufacture of lubricant and fuel additive components, including dispersant and detergent chemistries. |
| Thermoplastic Polyurethane | Cable jackets, boots, seals, protective films and interior or under-bonnet components requiring elastomeric behaviour with thermoplastic processing. |
| Thinner | Automotive refinish work requiring a thinner matched to the coating system and application conditions. |
| Tin | Tin-bearing solder, bearing alloys and protective metal finishes are used in selected automotive components and electrical systems, with the applicable material specification set by the component producer. |
| Titanium | Lightweight, corrosion-resistant components and performance parts where a specified titanium or titanium alloy grade meets the design requirement. |
| Titanium Dioxide | White pigment providing opacity and durability in vehicle topcoats, primers and refinish systems. |
| TMQ Rubber Antioxidant | Ageing-protection component in tyre and suitable automotive rubber compounds where TMQ or antioxidant RD is specified. |
| Tolyltriazole | Yellow-metal corrosion inhibitor in engine coolants and brake fluids, protecting copper, brass and bronze components in the cooling and braking circuits. |
| Trichloroethylene | Degreasing solvent for metal components before assembly, plating or coating, where the required grade and handling controls are agreed with the enquiry. |
| Triethylene Glycol Monomethyl Ether | Used as a glycol ether component in brake-fluid and hydraulic-fluid formulations, with water content selected against the blender's specification. |
| Trimethylolpropane Caprate/Caprylate | Base oil component in lubricants for air-conditioning compressors and other sealed systems. |
| Trimethylolpropane Trioleate | Automotive lubricant and metalworking formulations for component manufacture where an ester-based lubricity component is required. |
| Tris(2-Ethylhexyl) Trimellitate | Component in suitable interior, hose, gasket and flexible PVC compounds where heat ageing and plasticiser retention guide the formulation. |
| TXIB | Used in selected sealant, underbody, coating and interior polymer formulations where low plastisol viscosity and compatibility with the resin package are required. |
| Underfill Encapsulant | Underfill protection for qualified automotive electronic modules exposed to thermal cycling and vibration. |
| Unsaturated Polyester Resin | Moulded composite panels, covers and non-structural components produced by open- or closed-mould processes, with viscosity and cure profile matched to the production cycle. |
| Vanadium | Upstream vanadium input for selected high-performance alloy systems used in transport components, with the exact master-alloy route and chemistry set by the metal producer. |
| Viscosity Index Improver | Used in multigrade engine oils, heavy-duty diesel oils, automatic transmission fluids and gear oils, with the grade selected for the target viscosity profile and shear requirement. |
| White Oil | Process oil, polish ingredient and carrier fluid in car-care and surface-care formulations, and a process aid in rubber and polymer components. |
| Wollastonite | Friction materials and engineering-plastic components may use acicular wollastonite for reinforcement, with aspect ratio, particle size and surface treatment selected for the compound. |
| Wool | Suitable processed fibre grades for automotive felt, padding and acoustic components, subject to the converter's composition, contamination and performance specification. |
| Xenon | Lighting gas in compatible high-intensity discharge lamp manufacturing and service supply chains. |
| ZBEC Rubber Accelerator | Tyre and automotive rubber component compounding where the cure package names a ZBEC accelerator and defines the required cure behaviour. |
| ZDDP | Used as an anti-wear and antioxidant additive in engine-oil and automotive lubricant formulations. |
| Zinc Anode | Zinc plating lines for fasteners, stampings and fabricated components, with the anode form chosen for the line layout, basket or hanging system and bath specification. |
| Zinc Dibutyldithiocarbamate | Formulation component for selected hose, belt, seal and vibration-control compounds whose approved recipe identifies accelerator BZ or ZDBC. |
| Zinc Diethyldithiocarbamate | Accelerator input for tyres, hoses, belts, seals and vibration-control rubber compounds where ZDEC is specified for the cure package and processing response. |
| Zinc Dimethyldithiocarbamate | Cure package component in qualified tyre, hose, belt, gasket and vibration-control rubber formulations. |
| Zinc Ingot | Zinc die-cast components and alloy parts, where casting quality depends on the purity grade and the impurity limits charged into the melt. |
| Zinc Mercaptobenzothiazole | Accelerator in rubber compounds for tyres, hoses, belts and mounting components where cure behaviour is defined by the compounder. |
| Zinc Oxide | Vulcanisation activator in tyre and technical rubber compounds, and a component in selected lubricant and grease additive packages. |
| Zinc Phosphate | Primer surfacers and refinish primer formulations for vehicle bodywork and component coating lines that specify a zinc phosphate anti-corrosive pigment. |
| Zinc Stearate | Pressing lubricant and release aid in brake lining and friction material manufacture, and a dusting agent in rubber component assembly. |
Request a quote
Tell us the product, grade and quantity you need and we will price it.