Polystyrene Supplier in Malaysia for GPPS, HIPS and EPS
- Also known as
- PS
ChemTrade handles B2B polystyrene supplier enquiries for plastics processors, packaging manufacturers and industrial buyers across Malaysia. Polystyrene, abbreviated PS, is a styrene-based thermoplastic selected for rigid moulded parts, extruded sheet, thermoformed packaging and lightweight foamed products. The grade family determines clarity, toughness and processing route.
General-purpose polystyrene, or GPPS, is the clear and rigid family used where stiffness and surface appearance lead the specification. High-impact polystyrene, or HIPS, is rubber modified for tougher opaque parts. Expandable polystyrene beads are processed separately into moulded foam packaging and insulation shapes.
Applications range from household articles, appliance liners and display parts to rigid packaging, formed sheet and thermal-insulation components. Buyers normally distinguish grades by process, melt flow, impact requirement, colour and finished-part performance rather than ordering polystyrene as one universal resin.
Send the grade family, processing method, current grade or target specification, colour, quantity and delivery location with your enquiry. Availability, packing, supporting documents and delivery timing are confirmed with the quotation.
- CAS number
- 9003-53-6
- Grade
- GPPS, HIPS, expandable polystyrene
- Appearance
- clear to opaque thermoplastic pellets, or expandable beads by grade
Polystyrene grades and forms
We supply several forms to suit different formulating and dosing setups. If you need a size that is not listed, ask us.
| Grade | Form | Assay | Typical use | Packing |
|---|---|---|---|---|
| General-purpose polystyrene (GPPS) | clear, rigid thermoplastic pellets | — | Injection moulding, extrusion and thermoforming of transparent packaging, display parts, laboratory articles and general rigid components where clarity, stiffness and dimensional consistency matter. | Confirm the required pack format with the quotation. |
| High-impact polystyrene (HIPS) | opaque rubber-modified thermoplastic pellets | — | Appliance liners and housings, thermoformed packaging, point-of-sale parts and injection-moulded components that need greater toughness than standard clear GPPS. | Confirm the required pack format with the quotation. |
| Expandable polystyrene bead grade | expandable polymer beads | — | Moulded protective packaging, insulated boxes and thermal-insulation shapes produced by pre-expansion and steam moulding. State whether the enquiry is for raw expandable beads or a finished expanded-foam article. | Confirm the required pack format with the quotation. |
How to buy polystyrene from ChemTrade
Request a quote for polystyrene
Use the form below to request a quotation. You can also email sales@chemtrademalaysia.com or send us a message on WhatsApp.
Specifications
| Parameter | Value | Method |
|---|---|---|
| Appearance | clear to opaque pellets for solid grades, or expandable beads by grade | — |
| Polymer type | styrene-based thermoplastic | — |
| Processing methods | injection moulding, extrusion and thermoforming; steam moulding for expandable bead grades | — |
| Common grade controls | melt flow rate, impact strength, Vicat softening temperature, colour and dimensional properties confirmed against the required grade | — |
| Grade distinction | GPPS is the clear rigid general-purpose family, HIPS is impact modified and expandable beads are supplied for foamed mouldings | — |
Polystyrene applications
Safety and handling
Keep resin sealed, dry and protected from heat and contamination. Prevent loose pellets from creating slip hazards, and follow the grade-specific safety information and processing controls supplied for the quoted material.
Common questions about polystyrene
What is the difference between GPPS and HIPS?
GPPS is the standard clear, rigid polystyrene family and is chosen for clarity, stiffness and straightforward moulding. HIPS is rubber modified, which trades some transparency and stiffness for better impact resistance. Choose between them from the part's appearance, toughness and processing requirements rather than from the acronym alone.
Is expandable polystyrene the same as ordinary polystyrene pellets?
They share a polystyrene base, but the supplied forms and processing routes differ. GPPS and HIPS pellets are melted for injection moulding, extrusion or thermoforming. Expandable polystyrene is supplied as beads that are expanded and steam moulded into lightweight foam parts.
Which polystyrene grade suits injection moulding or thermoforming?
Both GPPS and HIPS are used in those processes. GPPS is the usual starting point for clear, stiff parts, while HIPS suits opaque parts that need more toughness. State the process, wall thickness, appearance target, current melt flow and any impact requirement so a closer grade match can be quoted.
What specifications should a polystyrene buyer provide?
Give the grade family, processing method, melt flow requirement and colour, together with any limits for impact strength, Vicat softening temperature or dimensional performance. A current grade designation or technical data sheet is useful when the enquiry is for a production replacement.
Can polystyrene be requested for packaging applications?
Yes. GPPS, HIPS and expandable bead grades serve different rigid, thermoformed and foamed packaging formats. Describe the finished article, process and documentation needed so the quotation is based on the intended application. Supply is subject to applicable requirements.
Is polystyrene the same as styrene monomer?
No. Styrene monomer is the liquid starting material used to make the polymer, while polystyrene is the finished thermoplastic resin supplied as pellets or expandable beads. They are separate products with different handling and processing requirements.
What details are needed for a polystyrene price quotation?
Send GPPS, HIPS or expandable bead grade, the application and processing method, target specification, colour, quantity and delivery location. Include the required timing, pack preference and document list so the offer can address the complete requirement.